English
Polski
Easy-adaptable IR detection module with a 150 kSps, 24-bit ADC and PGAAM03461-01
The AM03461-01 is an easy-adaptable MWIR digital detection module delivering high performance at room-temperature operation. Its compact, plug-and-play design with a single power supply, SPI interface, and Arduino-ready ADC enables rapid prototyping and easy integration.
Highly configurable electronics, analog output with PeakDetector functionality, and optics-friendly mechanics ensure flexibility for a wide range of applications.
Features
RoHS-compliant III-V material
Spectral range: 2.0 to 5.6 μm
Active area diameter: 1 mm
Bandwidth: analog up to 1 MHz, digital 150 kSps, 24-bit resolution
Single, low-voltage power supply: 2.7 to 3.6 V
ADC MCP3565R
Integrated PGA (0.33x to 64x)
20 MHz SPI-compatible interface
Small dimensions: 10 mm × 10 mm
Compatible with THORLABS 16 mm cage system
Applications
Gas detectors with MEMS, LED, or laser sources
Temperature sensors
Embedded systems
Portable devices
Specification
(Tamb = 20°C, Rload = 1 MΩ to ground, unless otherwise noted)
Parameter |
Typical value |
Unit |
||
|
SPECTRAL CHARACTERISTICS
|
||||
|
Cut-on wavelength, λcut-on (10%)
|
2.0 | μm | ||
|
Peak wavelength, λpeak
|
4.5 | μm | ||
|
Cut-off wavelength, λcut-off (10%)
|
5.6 | μm | ||
| Voltage responsivity Rv (λpeak) |
346..67200
|
V/W
|
||
| Detectivity, D* (λpeak, 1 kHz) |
1.0×109
|
cm⋅Hz1/2/W
|
||
| OPTICAL | ||||
| Active area diameter, dA | 1 | mm | ||
| Acceptance angle, Φ | 180 | deg. | ||
| DIGITAL OUTPUT PERFORMANCE | ||||
| Resolution | 24 | bit | ||
| Maximum sample rate | 153.6 | kSps | ||
| PDA gain | 0.33..64 | V/V | ||
| Oversampling | 32..98304 | - | ||
| ANALOG OUTPUT PERFORMANCE | ||||
| Output offset (no radiation) | 1.0 | V | ||
| PeakDetector | 0.3 | ms | ||
| Output impedance, Rout | 0 | Ω | ||
| Output voltage swing, negative | 0.01 | V | ||
| Output voltage swing, positive | 2.9 | V | ||
| Low cut-off frequency, flo (DC coupling) | 0 | Hz | ||
| High cut-off frequency, fhi | 1.0 | MHz | ||
| POWER SUPPLY | ||||
|
Supply current on Vamp and GND pins (Rload=50Ω)
|
20 | mA | ||
Spectral response
(Tamb = 20°C)
Mechanical layout
(unit: mm)
Access to file
Access to this file is limited. In order to download it, please provide all the information and submit the form.
Application notes
Temperature sensor characteristics
For more information, please contact us directly
