Standard
MIP series
Transimpedance preamplifier
MIP is a series of medium-size transimpedance, DC or AC coupled preamplifiers, intendend to operate with either biased or non-biased VIGO detectors. MIP is equipped with a fan and does not require any additional external heatsink. It is one of the most user-friendly preamplifier which surely facilitate work.
See specification
Types of VIGO detectors that can be integrated with MIP preamplifier
Photoconductive: PC-2TE, PC-3TE, PC-4TE
Photoconductive optically immersed: PCI-2TE, PCI-3TE, PCI-4TE
Photovoltaic: PV-2TE, PVA-2TE, PV-3TE, PV-4TE
Photovoltaic optically immersed: PVI-2TE, PVIA-2TE, PVI-3TE, PVI-4TE
Photovoltaic multiple junction: PVM-2TE
Photovoltaic multiple junction optically immersed: PVMI-2TE, PVMI-3TE, PVMI-4TE
Specification (Ta = 20°C)
Parameter |
Typical value |
Conditions, remarks |
|
| Low cut-off frequency flo, Hz | DC, 10, 100, 1k, 10k | ||
|
High cut-off frequency fhi, Hz
|
100k, 1M, 10M, 100M, 250M | ||
|
Transimpedance Ki, V/A
|
up to 200k | fixed | |
|
Output impedance Rout, Ω
|
50 | ||
| Output voltage swing Vout, V | ±10
±2 ±1 |
fhi ≤ 1 MHz, RL = 1 MΩ*)
1 MHz < fhi ≤ 10 MHz, RL = 1 MΩ*) 10 MHz < fhi ≤ 250 MHz, RL = 50 Ω*) |
|
|
Output voltage offset Voff, mV
|
max ±20**) |
|
|
|
Power supply voltage Vsup, V
|
±15
±9 |
fhi ≤ 1 MHz
fhi >1 MHz |
|
| Power supply current Isup, mA | max ±50 | ||
|
Ambient operating temperature Ta, °C
|
10 to 30 | ||
|
Signal output socket
|
SMA | ||
|
Power supply and TEC control socket
|
LEMO (female) | ECG.0B.309.CLN | |
|
Mounting hole
|
M4 | ||
|
Fan
|
yes | ||
|
*) RL – load resistance
**) Measured with equivalent resistor at the input instead of the detector, it is to avoid the environmental thermal radiation impact.
|
|||
Mechanical layout, mm
Access to file
Access to this file is limited. In order to download it, please provide all the information and submit the form.
Application notes
Temperature sensor characteristics
Dedicated electronics
Contact form
For more information, please contact us directly:
